• Fiio X5 II Digital Audio Player
  • Fiio X5 II Digital Audio Player
Zoom

Fiio X5 II Digital Audio Player

$479.99

  • Description

Description

All new X5 2nd gen - native DSD decoding, more musical, more portable. One small step in your eyes, one giant leap for your ears.

Good sound comes from a quality power supply
Seamless voltage switching design between different gain levels. High gain reaches 14V (+/-7V), 40% higher than the 1st gen X5, putting the op amps in their best working range, greatly increasing dynamics. Low gain voltage adjusted to +/-5V, reducing power consumption for increased runtime.

Native DSD128 Decoding
All new digital audio architecture: JZ4760B + SA2000 + PCM1792A + PGA2311A. Native DSD64/128 support and SACD ISOs. Other lossless formats such as WAV, FLAC, APE, WMA, ALAC, AIFF are also supported at up to 192kHz/24bit. Usage of Texas Instruments best analog volume controller ensures most faithful reproduction while avoiding issues such as channel imbalance.

Only the Best Parts
Top shelf PCM1792A from Texas Instrument coupled with new OPA1652 gives great dynamic performance and FET inputs for I/V conversion, realizing extra-low distortion (0.00005%) and noise. Two OPA1612 are used for low pass filtering and voltage amplification. Finally, two BUF643U current buffers supply up to 250mA output to headphones, achieving wide sound stage and highly dynamic musical performance with good bass power.

Dual Crystal Oscillators
The X5-II makes use of two crystal oscillators, one each for the 44.1kHz and 48kHz frequency multiples. This no-compromise design ensures the lowest jitter and highest precision for playback of music at all sample rates, eliminating all conversion artifacts.

Lighter, Smaller, More Ergonomic
Compared to the 1st gen X5, the new X5-II is 15% lighter and 12% smaller. The ergonomics are optimized for better user experience and improved playback control. The new deep-sleep standby mode allows the X5 to turn on in 0 seconds flat.

 

Technical Specifications:

- Model/Number: X5 (X5 2nd gen)
- Headphone Port: Standard 3.5mm Headphone Port
- Drive Ability: 16~150 Ω
- Color: Titanium
- Dimensions: 109 mm× 63.5 mm× 15.3 mm
- Volume Control: 120 steps digital potentiometer
- Weight: 165 g
- Equalizer: 10-band equalizer (±6dB)
- Display Screen: 2.4", 262,144 color HD IPS screen with 400x360 pixels
- Line Out: Standard 3.5mm Port (Shared line out / S/PDIF coaxial out)
- Digital Out (Coaxial): Standard 3.5mm Port (Shared line out / S/PDIF coaxial out)
- Balance: 10 dB
- USB DAC: Supporting up to 24bit / 192kHz and DSD (driver installation required)
- Gain: 3.6dB (Gain=L), ( 9.1dB Gain=H)
- Storage: 256 GB

 Performance Parameters for Line Output

- THD+N: <0.001% (1 kHz)
- SNR: ≥114 dB (A-weight)
- Frequency Response: 20 Hz~20 kHz
- Dynamic Range: >110 dB
- Crosstalk: >115 dB (10 KΩ/1 kHz)
- Line Output Level: 1.53 Vrms (10 KΩ/1 kHz)

Performance Parameters for Headphone Output

- Output Power 1: >245 mW(32Ω//THD+N<1%)
- Output Impedance: <0.2 Ω(32Ω)
- Output Power 2: >436 mW(16Ω/THD+N<1%)
- Crosstalk: >75 dB (1 kHz)
- Output Power 3: >27 mW(300Ω/THD+N<1%)
- THD+N: <0.001% (1 kHz)
- Frequency Response: 20 Hz~20 kHz
- MAX Output Voltage: >8.2 Vp-p
- SNR: ≥117 dB (A-weighted)
- MAX Output Current: >250 mA(For reference)

Power and Battery

- Power: DC5V 2A recommended
- Battery Capacity: 3300 mAh
- Charge Display Red light indicates , green light turns on after fully charged
- Battery Life: >10 h (32Ω; normal volume with display off )
- Battery Display: Yes (Accurate battery % readings))
- Charging Time: <4 h (DC5V 2A)

Audio Formats Supported

LOSSLESS
 
- DSD: DSD64, DSD128 (.iso&.dsf & .dff);
- APE(Fast): 192 kHz/24 bit;
- APE(Normal): 96 kHz/24 bit;
- APE (High): 96 kHz/24 bit;
- AIFF: 192 kHz/24 bit;
- FLAC: 192 kHz/24 bit;
- WAV: 192 kHz/64 bit;
- WMA Lossless: 96 kHz/24 bit
- Apple Lossless: 192 kHz/24 bit;
 
- LOSSY COMPRESSION: MP2、MP3、AAC、ALAC、WMA、OGG

Recently Viewed